![](https://new.kcsnet.or.kr/kcs/publication/img/cover/bkcs_3202.jpg) |
ISSN 0253-2964(Print) ISSN 1229-5949(Online)
Volume 32, Number 2
BKCSDE 32(2)
February 20, 2011 |
|
|
Title |
Novel Solid Phase Extraction Procedure for Some Trace Elements in Various Samples Prior to Their Determinations by FAAS |
Author |
&350;erife SAÇMACI*, &350;enol KARTAL, Mustafa SAÇMACI, Cengiz SOYKAN |
Keywords |
Chelating resin, Separation, Preconcentration, Trace element, FAAS |
Abstract |
A novel method that utilizes poly(5-methyl-2-thiozyl methacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid-co-divinylbenzene) [MTMAAm/AMPS/DVB] as a solid-phase extractant was developed for simultaneous preconcentration of trace Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Ni(II), Pb(II), and Zn(II) prior to the measurement by flame atomic absorpiton spectrometry (FAAS). Experimental conditions for effective adsorption of the metal ions were optimized using column procedures. The optimum pH value for the simultaneously separation of the metal ions on the new adsorbent was 2.5. Effects of concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of the analytes were investigated. A high preconcentration factor, 100, and low relative standard deviation values, ≤ 1.5% (n = 10), were obtained. The detection limits (μg L‒1) based on the 3s criterion were 0.18 for Cd(II), 0.11 for Co(II), 0.07 for Cr(III), 0.12 for Cu(II), 0.18 for Fe(III), 0.67 for Mn(II), 0.13 for Ni(II), 0.06 for Pb(II), and 0.09 for Zn(II). The validation of the procedure was performed by the analysis of two certified reference materials. The presented method was applied to the determination of the analytes in various environmental samples with satisfactory results. |
Page |
444 - 450 |
Full Text |
PDF
|
|
![](/image/img_button/btn_list.gif)
|