Current time in Korea 07:08 Mar 29 (Fri) Year 2024 KCS KCS Publications
KCS Publications
My Journal  Log In  Register
HOME > Search > Browsing(JKCS) > Archives

Journal of the Korean Chemical Society (JKCS)

ISSN 1017-2548(Print)
ISSN 2234-8530(Online)
Volume 26, Number 6
JKCSEZ 26(6)
December 20, 1982 

 
Title
Estimation of Mechanical Properties for Particle Dispersed Composites

입자 분산 복합재료의 기계적 성질 추정
Author
Tak Jin Moon, Dae Soon Im

문탁진, 임대순
Keywords
Abstract
유한요소법을 이용하여 니켈입자가 분산된 폴리에틸렌의 기계적 성질을 추정하였다. 이 해석에서 다음 2단계의 과정을 통해 조사하였다. 첫 단계는 모재의 중심부에 구상의 물질을 포함하는 이른바 단일요소 모델을 생각하여 이것을 유한요소법에 의해 계산하였고, 다음 단계는 이러한 단일요소 모델이 모여 전체를 구성하고 있으므로 이 단일 모델이 조합된 형태의 전체 모델을 설정하여 해석 하는 것이다. 이 두 과정에서 니켈과 폴리에틸렌의 두상만을 고려한 2상 모델과, 니켈과 폴리에틸렌의 복합재료에서 이른 바 transcrystalline 구역이 관찰되어 이 구역을 고려한 3상 모델의 두 모델을 각각 사용하여 그 차이를 살펴 보았다. 유한요소법은 임의의 하중에서 응력 및 변위의 계산을 가능하게 한다. 이 컴퓨터로 계산된 출력으로 부터 탄성계수, poisson 비 및 복합재료의 응력 분포등을 얻을 수 있었다. 이 유한요소법에 의한 계산과 인장 실험을 통한 실험결과는 서로 잘 일치한다.

The mechanical properties of nickel particle polyethylene composites were estimated by using a finite element method. Two steps were carried out in this analysis; the first step was to consider an unit model composed of spherical cell in the center of the matrix and the second step was to consider a total model composed of unit model. Two phase and three phase models were used, since another third phase were observed between matrix and nickel particle. Finite element method permits the calculation of the stress and displacement, assuming the arbitrary loads. Elastic modulus, Poisson's ratio and stress distribution of composites were obtained from this output. Comparison of the calculation by finite element method and the experimental results for Ni-filled polyethylene showed good agreement in tensile properties.

Page
414 - 420
Full Text
PDF