Current time in Korea 20:41 Mar 19 (Tue) Year 2024 KCS KCS Publications
KCS Publications
My Journal  Log In  Register
HOME > Search > Browsing(JKCS) > Archives

Journal of the Korean Chemical Society (JKCS)

ISSN 1017-2548(Print)
ISSN 2234-8530(Online)
Volume 20, Number 5
JKCSEZ 20(5)
October 20, 1976 

 
Title
Effect of Corona Treatment of Polymers on Bonds to Aluminum

고분자 물질의 표면에너지 증가에 대한 새로운 이론. 고분자 물질의 코로나 방전처리가 알루미늄과의 접착강도에 주는 영향
Author
Chung Yup Kim, Ki Joong Sung

김정엽, 성기중
Keywords
Abstract
PE, PP 및 PVC를 corona 방전으로 처리한 후 알루미늄과 접착을 시키면 접착강도가 크게 향상된다. 그러나 corona 방전으로 처리한 PE와 PP를 80℃로 조절한 건조기에 넣고, PVC는 50℃로 조절한 건조기에 넣어 15분간 방치하면 corona 방전처리만 했을 때 보다 접착력이 1/2밖에 되지 않는다. 따라서 고분자물질을 corona 방전처리 했을 때 접착강도의 증가는 고분자물질의 산화에 의한 것이라고만은 볼 수 없다. 접착강도의 심한 진폭은 Weibull 분포함수를 이용하여 조사하였다. 이 연구에서는 corona 방전으로 처리한 고분자물질을 알루미늄과 접착시켰을 때 그 강도의 증가는 고분자물질의 표면에 집착된 electret의 영향이 크다는 것을 나타내었다.

Corona treatment of PE, PP and PVC showed a dramatic increase of bond strength when lap joints were made between the polymers and aluminum plates. Heating the corona-treated PE and PP, and PVC in a drying oven at 80 and 50℃, respectively, for 15 min reduced the bond strength to about a half of that of corona-treated but unheated polymers, which indicated that the increase of bond strength was not due to oxidation of the polymer surface. The Weibull distribution function was employed to check reliability of the scattered data obtained from testing the lap joints. It is speculated that electron was deposited on the corona-treated polymer surface to enhance bond strength with aluminum.

Page
417 - 423
Full Text
PDF