Current time in Korea 01:56 Mar 29 (Fri) Year 2024 KCS KCS Publications
KCS Publications
My Journal  Log In  Register
HOME > Search > Browsing(BKCS) > Archives

Bulletin of the Korean Chemical Society (BKCS)

ISSN 0253-2964(Print)
ISSN 1229-5949(Online)
Volume 24, Number 11
BKCSDE 24(11)
November 20, 2003 

 
Title
Dissolution of Mo/Al Bilayers in Phosphoric Acid
Author
In Sung Kim, Seung whan Chon, Ky Sub Kim, Il Cheol Jeon
Keywords
Wet etching, Tafel plot, Quartz crystal microbalance, SEM, HNO3
Abstract
In the phosphoric acid based etchant, the dissolution rates of Mo films were measured by microgravimetry and the corrosion potentials of Mo and Al were estimated by Tafel plot method with various concentrations of nitric acid. Dissolution rate of Mo increased with the nitric acid concentration and reached a limiting value at high concentration of nitric acid in ambient condition. Corrosion potentials of Mo and Al shifted to positive direction and the difference between potentials of both metals was about 1,100 mV and 1,200 mV with 1% and above 4% of HNO3, respectively. For a Mo/Al bilayers, the dissolution rate inversion is the main reason for good taper angle in shower etching process. Taper angles are observed by scanning electron microscope (SEM) after wet etching process for Mo/Al layered films with different concentrations of HNO3. In the etch side profile, it was found that Al corroded faster than Mo below 4% of HNO3 in dip etching process, however, Mo corroded faster above 4%. Trend for variation of taper angle of etched side of Mo/Al layered film can be explained by considering the effect corrosion rates of both metals with various concentrations of HNO3.
Page
1613 - 0
Full Text
PDF